This hardwood yo-yo is assembled by us from domestic parts. A printed American flag decorates one side. Yo-yo measures approximately 2-1/4″ diameter by 1-1/4″ thick.
Ages: 7 and up
Finish: lacquer, Ink
Dye Stains: These are water/alcohol based stains, specially made for dip finishing, which is the least wasteful application process. These are in a variety of colors and are primarily used on our NameTrain line. We typically overcoat with urethane to prevent bleeding when wet.
Enamel: A lot of our round parts have a hard, colored coating. This is a tumbled-on enamel, a solvent-based finish. Most of our colored wheels and colored rattle parts are finished this way.
Lacquer: Nitrocellulose lacquer is an age-old spray finish that provides a hard, shiny, paint-like coating. It can be clear or opaque bright colors. Historically used for Montgomery Schoolhouse products, though some are being shifted to other coating types. Lacquer is a petroleum-based finish.
Nothing at all: Yes, no finish at all, as seen on our new Schoolhouse Naturals line. With an enormous number of queries about all our finishes, we thought we would try a line that has had all of the finish concerns removed. So far, we’ve seen great interest.
Natural Oil: New to us, this is an FDA approved plant oil based finish, often used on kitchenwares. No allergenic nuts are used. This is a true oil finish and does not shine nor set really hard. It does, however, leave a rich amber appearance on our wood.
Teak Oil: Like natural oil, teak is used on salad bowls and other wooden housewares. Unlike natural oil however, teak is very quick drying and it sets hard.
Urethane: Another dip finish, more specifically called oil-modified urethane varnish, not a polyurethane. It is a clear finish, using a mineral spirit solvent. This finish takes a little extra time to cure and products may retain an odor until unwrapped—especially during the busy season.
Whey: Utilizing a byproduct of the cheese-making process, this was developed by the University of Vermont and now produced by Vermont Natural Coatings of Hardwick, VT. We use this finish on our oval rattle ends and an increasing number of other rattle parts.